Engine Course Descriptions

Many engine department courses have prerequisites. For example, to be accepted for Advanced Refrigeration/Containers, students must have successfully completed Basic Marine Electrician and Refrigeration System Maintenance and Operations.

UA to FOWT Program (SHLSOS-642)

UA to FOWT Program (SHLSOS-642)

This addendum serves as the program specific approval language on the Unlicensed Apprentice to FOWT Program (SHLSOS-642) course completion certificate. Any applicant who has successfully completed the entire Unlicensed Apprentice to FOWT (SHLSOS-642) program will satisfy:

  1. National:

a. PROVIDED the application is submitted within one year of program completion:

  1. The examination requirements of 46 CFR 12.505 for endorsement as QMED-Fireman/Watertender and QMED-Oiler; AND
  2. The examination and practical demonstration of ability requirements of 46 CFR 12.407(b)(3) for an endorsement as Lifeboatman; AND
  3. The First Aid and CPR training requirements of 46 CFR 11.201(i)(1); AND

b. The Basic Fire Fighting requirements of 46 CFR 11.201(h)(2) [Basic only] and 46 CFR 11.201(h)(3); AND

c. The Fire Fighting requirements of 46 CFR 13.201(c)(3), 13.301(c)(3), 13.401(d) and 13.501(c)(3) for any tankerman endorsement; AND

d. The course requirements of 46 CFR 13.401(e)(1) for original issuance of Tankerman-Assistant (DL) and Tankerman Assistant (LG):

    1. PROVIDED the application is submitted within five years of program completion;
    2. May be used for one application which results in the issuance of an endorsement and may not be used for any application transactions thereafter;
    3. With appropriate documentation as per Paragraph 4 below, may be issued while enrolled in the program after completion of Phase

     2. STCW:

a. The training requirements of 46 CFR 12.609(a)(2)(ii); and the standards of competence required by 46 CFR 12.609(a)(3); STCW Code Section A-III/4 and Table A-III/4, as amended 2010, meeting the National Assessment Guidelines from NVIC 07-14(Ch-4) for an STCW endorsement as Rating Forming Part of an Engineering Watch (with appropriate documentation as per Paragraph 4 below, may be issued while enrolled in the program after completion of Phase III); AND

b. The training requirements of 46 CFR 11.309(a)(4)(v), 11.319(a)(4)(v), 11.321(a)(3)(iii), 11.329(a)(4)(iii), and 11.335(a)(3)(iii); and the standards of competence required by 46 CFR 12.613; STCW Code Section A-VI/2 and Table A- VI/2-1, as amended 2010, meeting the National Assessment Guidelines from NVIC 04-14(Ch-1) for an STCW endorsement of Proficiency in Survival Craft and Rescue Boats Other Than Fast Rescue Boats (PSC); AND

c. The Basic Training standards of competence required by 46 CFR 11.302(a) and 12.602(a); STCW Code Section A-VI/1 and Tables A-VI/1-1, 1-2, 1-3, and 1-4, as amended 2010, meeting the National Assessment Guidelines from NVIC 08-14(Ch- 1) for an STCW endorsement of Basic Training (with appropriate documentation as per Paragraph 4 below, may be issued while enrolled in the program after completion of Phase I); AND

d. The Vessel Personnel with Designated Security Duties (VPDSD) training requirements of 46 CFR 12.625(a)(1); and the standards of competence required by STCW Code Section A-VI/6 paragraph 6 and Table A-VI/6-2, as amended 2010, meeting the National Assessment Guidelines from NVIC 21-14 for an endorsement of VPDSD (with appropriate documentation as per Paragraph 4 below, may be issued while enrolled in the program after completion of Phase I); AND

e. The standards of competence required by 46 CFR 13.609(a)(2); STCW Code Section A-V/1, Table A-V/1-1-1, as amended 2010, meeting the National Assessment Guidelines from NVIC 22-14(Ch-2) for an endorsement of Basic Oil and Chemical Tanker Cargo Operations (with appropriate documentation as per Paragraph 4 below, may be issued while enrolled in the program after completion of Phase III); AND

f. The standards of competence required by 46 CFR 13.611(a)(2); STCW Code Section A-V/1, Table A-V/1-2-1, as amended 2010, meeting the National Assessment Guidelines from NVIC 22-14(Ch-2) for an endorsement of Basic Liquefied Gas Tanker Cargo Operations (with appropriate documentation as per Paragraph 4 below, may be issued while enrolled in the program after completion of Phase III).

Advanced Refrigerated Containers Maintenance

Advanced Refrigerated Containers Maintenance

(70 Hours)

This course is designed to advance the knowledge of those seafarers who have been previously trained as a Refrigerating Engineer.  The training provides students with the theoretical and practical knowledge and the skills necessary to operate, maintain, troubleshoot, and repair refrigerated containers while serving in the capacity of maintenance electrician on board a container ship.  Students receive training in refrigerated container unit operation, maintenance, repair, and troubleshooting. This includes the various types of engines, refrigeration, and electrical systems. The course is designed to help students develop a systematic approach to troubleshooting and maintenance procedures and leads to certification in refrigerated containers maintenance and consists of classroom and practical shop training.

Prerequisites: SHLSS Marine Electrician and Marine Refrigeration Technician OR QMED-Any Rating.

Basic Auxiliary Plant Operations (SHLSOS-51)

Ratings Forming Part of an Engine Room Watch (SHLSOS-417)

(140 hours)

This is the first of three courses required to earn a USCG rating as a Fireman/Watertender Oiler (FOWT) and the first of three courses required to satisfy STCW endorsement as a Ratings Forming Part of the Engineering Watch.  The objective of this course to provide students with knowledge and practical operational skills required of rated engine department watchstanders in auxiliary plants as they prepare to sail in the capacity of FOWT.  Successful completion of this course and presentation of the certificate within ONE year of completion, will receive 30 days sea service credit towards a QMED rating, and will be accepted as having completed the tasks for General Subjects and Shipboard Systems and Subsystems and the general practical assessments from NVIC 07-14 (1.1.C, 1.1.D, 1.1.E, 1.1.F, 1.1.G, 1.2.A, 1.2.E, 1.2.F, 1.3.A, 1.3.B, 1.3.C, 2.3.A, 3.1.A, 4.1.A, 4.2.A) and NVIC 18-14 (3.1.A, 4.1.A, 5.1.A, 5.1.B, 6.2.A, 7.2.A, 7.6.A, 9.1.A, 9.1.B, 9.2.1, 9.3.A, 10.4.A, 10.6.A, 10.6.B).

Prerequisites: 60 days seatime in engine department

Basic Refrigeration & Heating, Ventilation, and Air Conditioning (HVAC) (SHLSOS-64) (Junior Engineer Course)

Basic Refrigeration & Heating, Ventilation, and Air Conditioning (HVAC) (SHLSOS-64) (Junior Engineer Course)

(70 hours)

This is one of three courses required for those seeking as QMED – Junior Engineer endorsement. This course provides the cognitive and practical mechanical skills required of Basic Refrigeration and HVAC.  Successful completion of this course and presenting the certificate of training WITHIN ONE YEAR of the completion of training will satisfy the examination requirements of 46 CFR 12.505 towards an endorsement of Junior Engineer, PROVIDED they have also completed Engineering Plant Maintenance (SHLSOS-191) and Basic Electricity (SHLSOS-52); AND present evidence of acquiring at least 90 days of engine room service while endorsed as a QMED Oiler or Fireman-Watertender prior to commencing the above training.

Prerequisites: Must hold RFPEW and 180 days seatime after FOWT in engine department

Basic Motor Plant Operations (SHLSOS-63)

Basic Motor Plant Operations (SHLSOS-63)

(66 hours)

This is the last of three courses required to earn a USCG rating as a Fireman/Watertender Oiler (FOWT) and the last of three courses required to satisfy STCW endorsement as a Ratings Forming Part of the Engineering Watch.  The objective of this course to provide students with knowledge and practical operational skills required of rated engine department watchstanders in motor plants as they prepare to sail in the capacity of Oiler. Successful completion of this course and presentation of the certificate within ONE year of completion, will receive 30 days sea service credit towards a QMED rating, and will be accepted as having completed the tasks for General Subjects, Electrical Subjects, Motor Propulsion subjects and the motor/diesel practical assessments from NVIC 07-14 (1.1.A, 1.1.B(M), 1.1.H(M), 1.1.I(M), 1.1.J, 1.1.K, 1.2.B, 1.2.C, 1.2.D, 2.1.A, 2.1.B, 2.1.C, 2.2.A, 2.2.B, 2.3.A, 4.2.B).

Prerequisites: Must have BAPO and 180 days engine seatime

Basic Electricity (SHLSOS-52) (Junior Engineer Course)

Basic Electricity (SHLSOS-52) (Junior Engineer Course)

(70 hours)

This is one of three courses required for those seeking a QMED – Junior Engineer endorsement. The course provides the mariner electrical skills required of a rated member of the engine department.  Successful completion of this course and presenting the certificate of training WITHIN ONE YEAR of the completion of training will satisfy the examination requirements of 46 CFR 12.505 towards an endorsement of Junior Engineer, PROVIDED they have also completed the Engineering Plant Maintenance (SHLSOS-191) and Basic Refrigeration and HVAC (SHLSOS-64); AND present evidence of acquiring at least 90 days of engine room service while endorsed as a QMED Oiler or Fireman-Watertender prior to commencing the above training.

Prerequisites: Must hold RFPEW and 180 days seatime after FOWT in engine department

Basic Steam Plant Operations (SHLSOS-73)

Basic Steam Plant Operations (SHLSOS-73)

(70 hours)

This is the second of three courses required to earn a USCG rating as Fireman/Watertender Oiler (FOWT) and the second of three courses required to satisfy STCW endorsement as a Ratings Forming Part of the Engineering Watch.  The objective of this course to provide students with knowledge and practical operational skills required of rated engine department watchstanders in steam plants as they prepare to sail in the capacity of F/WT.   Successful completion of this course and presentation of the certificate within ONE year of completion, will receive 30 days sea service credit towards a QMED rating, and will be accepted as having completed the tasks for General Subjects, Electrical Subjects, Steam Propulsion subjects and the steam practical assessments from NVIC 07-14 (1.1.B(S), 1.1.H(S), 1.1.I(S), 2.1.A, 2.1.B, 3.1.A, 3.1.C, 3.1.D, 3.1.E, 3.1.F, 3.1.G, 3.1.H, 3.1.I, 3.1.J).

Prerequisites: Must have BAPO and 180 days engine seatime

Designated Duty Engineer (Non-STCW)

Designated Duty Engineer (Non-STCW)

This test prep course is intended for candidates for certification as a designated duty engineer in a periodically unmanned engineroom on a seagoing ship powered by main propulsion machinery of 750 kW propulsion power or more. This course reviews topics that will be given on the USCG examination.

Prerequisites: Must have Water Survival, Adv Fire Fighting, Medical Care Provider and 1080 days total sea time. Recommended to have Coast Guard approval letter valid through dates of the class

Engineering Plant Maintenance (SHLSOS-191) (Junior Engineer Course)

Engineering Plant Maintenance (SHLSOS-191) (Junior Engineer Course)

(140 hours)

This is a one of three courses required for those seeking a QMED – Junior Engineer endorsement.  The course provides cognitive and practical mechanical skills required of engineering plant maintenance. Successful completion of this course satisfies the training requirements as outlined in 46 CFR 12.505(c), the requirements of Table A-III/5 of the STCW Code, as amended,  and the equivalent tasks of the National Assessment Guidelines in NVIC 18-14 for an endorsement as Able Seafarer – Engine (1.1.A, 1.2.A, 1.3.A, 2.1.A, 2.2.A, 3.1.A, 4.1.A, 5.1.A, 5.1.B, 5.1.C, 5.2.A, 6.1.A, 6.2.A, 6.3.A, 7.1.A, 7.2.A, 7.3.A, 7.4.A, 7.5.A, 7.6.A, 8.1.A, 8.1.B, 9.1.A, 9.1.B, 9.2.A, 9.3.A, 10.1.A, 10.2.A, 10.3.A, 10.4.A, 10.5.A, 10.6.A, 10.6.B, 10.6.C, 10.7.A, 10.8.A, 10.8.B, 10.9.A) and the tasks from NVIC 17-14 for OICEW (5.2.B, 5.2.C, 5.2.D, 8.2.C, 9.1.B, 9.1.C).

Prerequisites: Must hold RFPEW and 180 days seatime after FOWT in engine department

Engineroom Resource Management (SHLSOS-187)

Engineroom Resource Management (SHLSOS-187)

(35 hours)

Any applicant who has successfully completed this Engine Room Resource Management (SHLSOS-187) course will satisfy: The Engine Room Resource Management training requirements of 46 CFR 11.325(a)(3)(i) and (b)(1); 46 CFR 11.327(a)(3)(i) and (b)(1); 46 CFR 11.329(a)(4)(iv); 46 CFR 11.331(a)(3)(i) and (b)(1); and 46 CFR 11.333(a)(3)(i) and (b)(1); AND The Engine Room Resource Management standards of competence required by 46 CFR 11.329(a)(3); STCW Code Section A-III/1 and Table A-III/1 and Table A-III/1, as amended in 2010, meeting the National Assessment Guidelines from NVIC 17-14(Ch-4) Task 1.4

Prerequisites: 1080 days of seagoing service in the engine department; upgrading to or hold an Engineering license

Fireman/Oiler/Watertender (SHLSOS-384)

(150 hours)

Successful completion of this course will satisfy the professional examination requirements of 46 CFR 12.501(c)(5) for national rating endorsements as QMED-Oiler and Fireman/Watertender.  Topics include: a basic understanding of routine pumping operations, steam fundamentals, diesel engine properties, electrical installations and the associated dangers, maintenance and repair of machinery and tools used in the engine-room.

Prerequisites: Completion of Phase 4 of the UA program or 180 days of seagoing service as a wiper or coal passer.

Junior Engineer Program (SHLSOS-231)

(Contains the following three courses)

Basic Electricity
70 hours

This is one of three courses required for those seeking a QMED – Junior Engineer endorsement. The course provides the mariner electrical skills required of a rated member of the engine department.  Successful completion of this course and presenting the certificate of training WITHIN ONE YEAR of the completion of training will satisfy the examination requirements of 46 CFR 12.505(c) towards an endorsement of Junior Engineer, Electrician, Refrigeration Engineer and AS-E. PROVIDED they have also completed the Engineering Plant Maintenance (SHLSOS-191) and Basic Refrigeration and HVAC (SHLSOS-64).

Prerequisites: 120 days of sea time after completing the UA program or 180 days sea time while endorsed as RFPEW and hold FOWT.

 

 

Basic Refrigeration & Heating, Ventilation, and Air Conditioning (HVAC)
70 hours

This is one of three courses required for those seeking as QMED – Junior Engineer endorsement. This course provides the cognitive and practical mechanical skills required of Basic Refrigeration and HVAC.  Successful completion of this course and presenting the certificate of training WITHIN ONE YEAR of the completion of training will satisfy the examination requirements of 46 CFR 12.505(c) towards an endorsement of Junior Engineer, Electrician, Refrigeration Engineer and AS-E. PROVIDED they have also completed Engineering Plant Maintenance (SHLSOS-191) and Basic Electricity (SHLSOS-52);

Prerequisites: 120 days of sea time after completing the UA program or 180 days sea time while endorsed as RFPEW and hold FOWT.

 

Engineering Plant Maintenance

140 hours

This is a one of three courses required for those seeking a QMED – Junior Engineer endorsement.  The course provides cognitive and practical mechanical skills required of engineering plant maintenance. Successful completion of this course satisfies the training requirements as outlined in 46 CFR 12.505(c), the requirements of Table A-III/5 of the STCW Code, as amended, AND receive credit for the following tasks 3.1.A, 4.1.A, 5.1.A, 5.1.B, 5.1.C, 5.2.A, 6.1.A, 6.2.A, 6.3.A, 7.1.A, 7.2.A, 7.3.A, 7.4.A, 7.5.A, 7.6.A, 8.1.A, 8.1.B, 9.1.A, 9.1.B, 9.2.A, 9.3.A, 10.1.A, 10.2.A, 10.3.A, 10.4.A, 10.5.A, 10.6.A, 10.6.B, 10.6.C, 10.7.A, 10.8.A, 10.8.B, and 10.9.A  from OICEW NVIC 18-14; AND tasks 4.1.A, 5.2.B, 5.2.C, 5.2.D, 8.2.C, 8.2.D, 9.1.B, and 9.1.C from NVIC 17-14.

Prerequisites: 120 days of sea time after completing the UA program or 180 days sea time while endorsed as RFPEW and hold FOWT.

Machinist (SHLSOS-261)

Machinist (SHLSOS-261)

(102 hours)

Any applicant holding a QMED Junior Engineer endorsement and successfully completing your Machinist (SHLSOS-261) course, and presents your Certificate of Training WITHIN one year of the completion of training, will satisfy: The written examination requirements of 46CFR12.505(a) for the Machinist portion of the combined QMED – Pumpman/Machinist endorsement of 46 CFR 12.501(b)(1)(v) PROVIDED applicant currently holds a QMED – Pumpman rating or has completed an approved QMED – Pumpman course within one year of this application; AND The standards of competence for Task 8.1.A required by 46CFR 11.329(a)(3) and STCW Code Section A-III/1 as amended 2010, meeting the National Assessment Guidelines from NVIC 17-14 (Ch-4) for Officer in Charge of an Engineering Watch (OICEW).

Prerequisites: Must be taken in conjunction with Pumpman course or hold Pumpman endorsement; and hold endorsement as Junior Engineer, and 120 days of sea service after successful completion of Junior Engineer.

Management of Electrical and Electronic Control Equipment (SHLSOS-176)

Management of Electrical and Electronic Control Equipment (SHLSOS-176)

(70 hours)

This course is open to any Chief Engineers or 1AE seeking endorsement or renewal on vessels of 3000kW/4000 HP or more. Any applicant who has successfully completed the Management of Electrical and Electronic Control Equipment (SHLSOS-176) course will satisfy the Management of Electrical and Electronic Control Equipment training requirement of 46 CFR 11.325(a)(3)(iii) and (b)(3); 46 CFR 11.327(a)(3)(iii) and (b)(3); 46 CFR 11.331(a)(3)(iii) and (b)(3); and 46 CFR 11.333(a)(3)(iii) and (b)(3); AND the following demonstration of competencies from the Chief Engineer/Second Engineering Officer NVIC 15-14 and NVIC 16-14:  Tasks 5.1.A, 5.1.D, 5.1.E, 6.1.A.  Applicants are not required to present completed record of assessment sheets for the above tasks when applying for STCW endorsement.

Prerequisites: Complete OICEW or DDE 750kW/1000HP course OR hold valid STCW endorsement for OICEW in manned ER or an endorsement as DDE in periodically unmanned ER of 750kW/1000HP or more.

Marine Electrician (SHLSOS-269)

Marine Electrician (SHLSOS-269)

(175 hours)

Successfully completing this course and presenting the certificate of training will satisfy the examination requirements of 46 CFR 12.501 (b)(4) for the Electrician portion of the combined QMED-Electrician/Refrigerating Engineer, if presented within one year of the completion of training; PROVIDED the applicant presents evidence of 90 days of engine room service while holding an endorsement as a QMED prior to the commencement of this training; AND the accepted tasks from the National Assessment Guidelines of NVIC 17-14 of OICEW (6.1.D, 6.1.E, 6.2.A, 7.1.A, 7.2.A, 7.2.B, 7.3.A, 7.4.A).

The objective of the Marine Electrician course is to provide Engine Department personnel the ability to perform Function: Electrical, Electronic, and Control Engineering at the Support Level; Maintenance and Repair at the Support Level; and Controlling the Operation of the Ship and Care for Persons on Board at the Support Level.  This course teaches the theoretical and practical knowledge and skills necessary to perform maintenance and repair operations on motors, generators, and controllers on board ship.

Prerequisites: Must be taken in conjunction with Marine Refrigeration Tech or endorsed as electrician or QMED Any.

Marine Refrigeration Technician (SHLSOS-274)

Marine Refrigeration Technician (SHLSOS-274)

(207 hours)

Any applicant who has successfully completed your Refrigeration (SHLSOS-274) course and presents your certificate of training WITHIN ONE YEAR OF THE COMPLETION OF TRAINING will satisfy:  the written exam requirements of 46 CFR 12.505(a) for the Refrigerating Engineer portion of the combined QMED-Electrician/Refrigerating Engineer endorsement of 46 CFR 12.501(b)(1)(iv) PROVIDED applicant currently holds a QMED-Electrician rating or has completed an approved QMED-Electrician course within one year of this application; AND the following specific tasks from the OICEW NVIC 17-14: 4.3.T, 4.3.U, and 4.3.V; AND the specific task from RFPEW NVIC 7-14: 1.1.E

The objective of the Marine Refrigeration Technician Course is to provide Engine Department personnel with the theoretical and practical knowledge and the skills necessary to perform maintenance and repair operations on ship’s stores plants, air conditioning plants, cargo refrigeration, ventilation and dehumidification equipment, as well as pantry refrigerators, water coolers, and ice machines. An introduction to refrigerated container units is also presented.

Prerequisites: Must be taken in conjunction with Marine Electrician or endorsed as electrician or QMED Any.

OICEW Program

(Contains 5 OICEW Courses)

OICEW – Diesel Engine

140 hours

This course is part of the OICEW Program. Any applicant who has successfully completed this course will satisfy the Motor Plants training requirements of 46 CFR 11.329 (a)(4)(ix) for STCW endorsements as OICEW on vessels powered by main propulsion machinery of 750kW/1,000 HP propulsion power or more. The STCW code section A-III/1, Table A-III/1. The tasks outlined in NVIC 17-14: 4.2.C, 4.3.C, 4.3.F, 4.3.I, and 8.3.A. The objective of the course is to provide engine dept personnel who are wanting to upgrade to 3rd asst engineer/OICEW with the knowledge and proficiency at the operational level to prepare, operate, fault detect, and have an understanding of necessary measures to prevent damage for motor plants. Students who complete this course will be proficient in marine diesel engine operation fundamentals, construction, support systems, maintenance, testing and inspections, fuel oil treatment and delivery, and diesel engine control systems.

Prerequisites: 1080 days of sea going service, valid BST, PSC unlimited, and successfully completed the following courses or have the corresponding NVIC task numbers by certificate or QA: AFF, MCP, ERM, L&T, JE Program, Marine Elec, MRT, Machinist, Pumpman, Welding, Ship Constr & Stability.

 

Management of Electrical and Electronic Control Equipment (SHLSOS-176)

70 Hours

This course is open to any Chief Engineers or 1AE seeking endorsement or renewal on vessels of 3000kW/4000 HP or more. Any applicant who has successfully completed the Management of Electrical and Electronic Control Equipment (SHLSOS-176) course will satisfy the Management of Electrical and Electronic Control Equipment training requirement of 46 CFR 11.325(a)(3)(iii) and (b)(3); 46 CFR 11.327(a)(3)(iii) and (b)(3); 46 CFR 11.331(a)(3)(iii) and (b)(3); and 46 CFR 11.333(a)(3)(iii) and (b)(3); AND the following demonstration of competencies from the Chief Engineer/Second Engineering Officer NVIC 15-14 and NVIC 16-14:  Tasks 5.1.A, 5.1.D, 5.1.E, 6.1.A.  Applicants are not required to present completed record of assessment sheets for the above tasks when applying for STCW endorsement.

Prerequisites: Complete OICEW or DDE 750kW/1000HP course OR hold valid STCW endorsement for OICEW in manned ER or an endorsement as DDE in periodically unmanned ER of 750kW/1000HP or more.

 

Designated Duty Engineer (Non-STCW)

35 hours

This test prep course is intended for candidates for certification as a designated duty engineer in a periodically unmanned engineroom on a seagoing ship powered by main propulsion machinery of 750 kW propulsion power or more. This course reviews topics that will be given on the USCG examination.

Prerequisites: Must have Water Survival, Adv Fire Fighting, Medical Care Provider and 1080 days total sea time. Recommended to have Coast Guard approval letter valid through dates of the class

 

Self-Unloading Advanced

32 hours

This course is intended for mariners sailing in the capacity of head tunnelman/conveyorman or intend to sail as head tunnelman/conveyorman. At the conclusion of this course, students will be able to safely operate and maintain the conveyor system and all associated components.

Prerequisite: seatime as a Conveyorman with 1 year of sea service

 

Self-Unloading Basic

35 hours

This course is designed for mariners currently sailing on Great Lakes self-unloading vessels who have a desire to move into the conveyorman job.  The objective of this course is to train deck or engine sailors in the basics of the job of conveyorman/tunnelman on a self-unloading ship. Topics will emphasize safety and includes work hour management, job responsibilities, familiarization and operation of the unloading system, conveyor system clean up and shut down, troubleshooting, general maintenance, welding safety, record keeping and inventories.

Prerequisite: seatime as a Conveyorman with 1 year of sea service

Pumpman (SHLSOS-380)

Pumpman (SHLSOS-380)

(35 hours)

Successful completion of this course and presenting certificate within ONE year of the completion of training will satisfy the written exam requirements of 46 CFR 12.505(a) for the Pumpman portion of the combined QMED-Pumpman/Machinist endorsement of 46 CFR 12.501(b)(1)(v) PROVIDED applicant currently holds a QMED-Machinist rating or has completed an approved QMED-Machinist course within one year of this application; AND tasks 5.1.A, 5.2.A, 5.2.B, 5.2.C, 5.2.D, 5.2.E from the National Assessment Guidelines for an Officer in Charge of an Engineering Watch NVIC 17-14.

The objective is to provide engine department personnel with the theoretical and practical knowledge and the skills necessary to operate, maintain, and repair the equipment associated with the handling of liquid cargo onboard a tankship. Topics covered in the Pumpman course are Inert gas systems, crude oil washing systems, vapor recovery, and 2 days of assessment in the cargo simulator.

Prerequisites: Must be taken in conjunction with Machinist or hold Machinist endorsement,  endorsed with Tanker Asst-DL or LG, hold endorsement as Junior Engineer, and 120 days of sea service after successful completion of Junior Engineer.

Ratings Forming Part of an Engineering Watch (SHLSOS-417) (RFPEW)

This course is intended to train mariners for the STCW endorsement as an RFPEW, in accordance with CFR 12.609, and meets the standard of competence as specified in Table A-III/4 of the STCW Code and all of the tasks outlined in NVIC 07-14.

Prerequisite: Completion of Phase 2 of the UA program or 60 days of sea service in the engine dept

Self-Unloading Advanced

Self-Unloading Advanced

(32 hours)

This course is intended for mariners sailing in the capacity of head tunnelman/conveyorman or intend to sail as head tunnelman/conveyorman. At the conclusion of this course, students will be able to safely operate and maintain the conveyor system and all associated components.

Prerequisites: seatime as a Conveyorman with 1 year of sea service

Welding and Metallurgy Skills and Practices (SHLSOS-551)

Welding and Metallurgy Skills and Practices (SHLSOS-551)

(105 hours)

Students who successfully completes this course will have knowledge of shielded metal arc welding, gas metal arc welding, and Oxygen Acetylene torches for cutting and abrasion welding. Students will be able to tack and run a straight bead in a variety of situations, test welds, and use appropriate hand tools, machine tools and measuring instruments, while following all safety measures to meet the welding and fabrication standards of competence required by 46 CFR 11.329(a)(3); Section A-III/1 of the STCW Code, and meeting the National Assessment Guidelines from NVIC 17-14 Ch.-2 Tasks 8.1.B and 8.1.C.

Prerequisites: Be endorsed as FOWT or a rated member of the deck department.

The course schedule may change to reflect the needs of membership, the industry or the national interest. Seafarers should continue to consult each monthly edition of the Seafarers Log for the most up-to-date course schedule.

For additional information, contact the Paul Hall Center, P.O. Box 75, Piney Point, MD 20674-0075; telephone (301) 994-0010. Please note that students should check in the Saturday before their course’s start date. The courses listed here will begin promptly on the morning of the start dates.

In addition, basic vocational support program courses are offered throughout the year, one week prior to the AB, QMED, FOWT, Third Mate, Tanker Assistant and Water Survival courses. An introduction to computer courses will be self-study.